Redpark adapter for wired internet for the iPad. Provides iPads with POE power (charging) and LAN network access simultaneously. A special USB Micro B to Lightning cable is required for connection to the iPad, which we sell in 3 lengths.

Note that you use a POE switch or a POE injector to power the network cable.

Adapter dimensions: 81 x 44 x 24 mm

Connects a Lightning iPad or iPhone to Ethernet and power. This adapter charges the iPad or iPhone with PoE (802.3af) as a power source.
This new 2nd generation Ethernet adapter is a special version of the USB 2 to Ethernet adapter. When connected to an iPad or iPhone, it is immediately recognized as a network connection available for use by any iOS app.

The Redpark Gigabit+PoE Adapter connects iOS devices to Ethernet and uses power over Ethernet (PoE) to charge the device. This allows iOS devices to receive both data and power over a single Ethernet cable when connected to a PoE-compatible switch or PoE injector.

The Redpark Gigabit+PoE Adapter is immediately recognized as a network connection. The Ethernet connection is available for use by any iOS app and can be configured with the Settings app on the iPad when running iOS 10 (or later).

The Redpark Gigabit+PoE Adapter can be physically connected to an iOS device using a Lightning to USB Micro B cable (sold separately). It supports 10/100/1000 networks and offers bandwidth up to 225 Mbps.

Connectors:
Ethernet: RJ45 Auto MDX, USB: USB Micro B
The Redpark Gigabit+PoE Adapter is an 802.3(af) Class 0 device.
It requires the PoE-enabled switch or the PoE injector to supply 15.4W.
iOS 10.0.x or later.

Redpark recommends the Redpark USB Micro B Cable for Lightning 40cm when using this product with an iPad Pro 12.9". Please read the Redpark USB Lightning FAQ to learn more about this issue.

 
A Redpark USB Micro B Cable for Lightning (sold separately) is required for operation.

This product also requires a PoE (Power over Ethernet) enabled switch or PoE injector to work.

Please make sure, that your switch supports PoE and meets the above mentioned requirements before you order this product.
If your switch does not provide PoE ports, you should select the L6-NETAC product instead which has its own power supply.

The price does not include a USB Micro B to Lightning cable.
Option 40, 150 or 300 cm. Depending on the placement of the adapter.

Frequently asked questions

Q: How do I configure the network connection?
A: Through the Settings app on your iPhone or iPad. Once the adapter is connected to an iPad or iPhone, "Ethernet" will appear in the Settings app between WiFi and Bluetooth. Both DHCP and static IP addresses are supported.

Q: Which apps can I use with the Gigabit + PoE Adapter?
A: The network connection of the Gigabit + PoE adapter can be used by any iOS app. Please note that FaceTime, Messages and Wi-Fi Calling apps do not currently support Ethernet.

Q: What is the maximum bandwidth of the Ethernet connection?
A: The Gigabit + PoE Adapter is a special form of USB 2 to Ethernet Adapter. It offers bandwidth up to 225 Mbps. The maximum bandwidth depends on the USB subsystem in the iPad or iPhone.

Q: Can I share the mobile data connection of an iPad or iPhone via the Ethernet connection?
A: Not currently. Perhaps a future version of iOS will support this.

Q: Does the Gigabit + PoE Adapter have a unique MAC address?
A: Yes. Each adapter is programmed with a unique MAC address during the manufacturing process. The MAC address appears as the serial number in the Settings app. See General>Settings>About and select Gigabit + PoE Adapter.

Q: How much power does the adapter draw?
A: The Gigabit + PoE adapter is an 802.3(af) class 0 device. It requires the PoE-enabled switch or the PoE injector to provide 15.4W.

Q: How much power is supplied to the iPad?
A: Up to 2.1A (5V). This is enough to fully charge/power any iPad or iPhone model.

Q: Can the adapter work without receiving power from a PoE switch or PoE injector?
A: No. The Gigabit + PoE adapter cannot receive power from the iPad. It must receive power from PoE.

Q: Can I connect the adapter to a PoE-compatible switch or PoE injector?
A: You must use a switch or injector that provides 48V and 15.4W of power. The adapter will not work with injectors that provide 15V or 24V.

Q: Can any type of Ethernet cable be used to connect the adapter to the PoE injector or PoE-compatible switch?
A: Use Cat5e, Cat 6, or Cat 6A cables. If the distance between the adapter and the PoE power source is 30 ft or more, we recommend Cat 6A cables.

Q: Does the adapter have LEDs to indicate network status?
A: Yes. There is a power LED and LEDs to indicate network connection status and network activity.

Q: Why does the Adapter have a Micro B USB port instead of a Type A USB port?
A: The Type A USB port is used on devices that act as a USB host. This adapter functions as a USB device and must therefore use a Type B USB port. We chose a Micro B version to save space on the circuit board in the Adapter.